Source Measure Unit
A Source Measure Unit (SMU) is a specialized electronic test instrument used in electronics and semiconductor testing. It combines the functions of both a power supply and a digital multimeter into a single device.
An SMU is capable of sourcing voltage or current to a device under test (DUT) while simultaneously measuring the resulting current or voltage, respectively. It is an essential tool for characterizing and testing electronic components such as transistors, diodes, integrated circuits, and other semiconductor devices.
SMUs are commonly used in research and development laboratories, semiconductor manufacturing, quality control, and testing environments where accurate and controlled electrical measurements are crucial. They play a crucial role in ensuring the performance and reliability of electronic components and circuits.
s series desktop
DC source Measure Unit
This source measure unit is engineered for high precision and features an expansive dynamic range. It has state-of-the-art digital touchscreen interface. Its four-quadrant operation capacity allows for precise collection and testing of both input and output voltage and current.
With a remarkable maximum output voltage of 300V and an ultra-low minimum output current of 100pA, our Source Measure Unit stands unrivaled in performance and reliability. This versatile instrument finds extensive utility in a spectrum of electrical characteristics tests, catering to semiconductor ICs, components, power devices, sensors, organic materials, and nanomaterials.
SMU Features
- 5 inch touch screen graphical operation
- Wide range Max 300V, Min 10pA
- LIV, PIV software quickly testing
- High-accuracy at 0.03%
- Four-quadrant operation 100nA ~ 1A, 300mV ~ 300V
- Various scanning modes
- USB storage and export
- Multiple interfaces RS-232/GPIB/LAN
SMU Applications
- Semiconductor device test: Resistance, Diode, Transistor, MOSFET, SiC, GaN, etc
- Energy and efficiency test: LED / AMOLED, Solar cells, DC-DC converters, etc
- Sensor characteristic test: Resistivity, Hall effect, etc
- Organic material test: Electronic ink, Printed electronic technology, etc
- Nanomaterial test: Graphene, Nanowires, etc
SMU Technical Parameters
Max output power: 30w, four quadrant source or sink operation
Contact us to request the complete catalog and specification at info@chiplix.com.
| Source limit - Voltage source | ±10V(≤3A range)，±30V(≤1A range)，±300V(≤100mA range) |
| Source Limit - Current source | ±3.15A(≤10V range)，±1.05A(≤30V range)，±105mA(≤300V range |
| Overrange | 105% of range, source and measure |
| Stable load capacitance | <22nF |
| Broadband noise(20MHz) | 2mV RMS(Typical value)，<20mV Vp-p(Typical value) |
| Cable protection voltage | Output Impedance 30KΩ，Output voltage offset<80mV |
| Max sampling rate | 1000S/s |
| Trigger | upports IO triggering input and output, with configurable triggering polarity |
| Output interface | Banana head socket output |
| Communication port | RS-232, GPIB, LAN |
| Power | AC 100~240V 50/60Hz |
| Work environment | 25±10°C |
| Size | 425mm L× 255mm W × 106mm H |
| Weight | 5Kg |
| Warranty | 1Year |
p series desktop
pulse source Measure Unit
The P-Series Pulse Source Measure Unit represents a recent pinnacle of precision engineering, distinguished by its expansive dynamic range, digital interface for voltage and current input/output, and high-accuracy measurement capabilities. Crafted as an evolutionary successor to the DC Source Measure Unit, this newly developed instrument achieves a maximum output voltage of 300V, alongside an impressive peak pulse output current capacity of 10A.
Endowed with four-quadrant operational proficiency, the unit integrates into a diverse array of electrical characteristic examinations. Its versatility extends across a spectrum of material and device assessments, encompassing contemporary semiconductor studies, investigations into nanometer-scale materials, explorations of organic semiconductors, and the scrutiny of diminutive, low-power electronic devices. The P-Series Pulse Source Measure Unit thus emerges as an indispensable tool which offers unparalleled precision and adaptability in the pursuit of cutting-edge advancements within the realms of electronic and materials sciences.
SMU Features
- 5 inch touch screen graphical operation
- Min currrent 1pA Max voltage 300V
- Min pulse width 200μS
- High-accuracy at 0.1%
- Four-quadrant operation wide range
- Various scanning modes
- USB storage and export
- Multiple interfaces RS-232/GPIB/LAN
SMU Applications
- Discrete semiconductor devices feature test, resistor, diode, light emitting diodes, zener diodes, the PIN diode, BJT transistor, MOSFET, SIC, etc
- Energy and efficiency test: LED / AMOLED, Solar cells, DC-DC converters, etc
- Sensor characteristic test: Resistivity, Hall effect, etc
- Organic material test: Electronic ink, Printed electronic technology, etc
- Nanomaterial test: Graphene, Nanowires, etc
SMU Technical Parameters
Contact us to request the complete catalog and specification at info@chiplix.com.
| Source limit | In DC mode, max output power is 30w; In pulse mode,the max output power reach 300w; Four-quadrant source mode or sink mode |
| Overrange | 105%of range, source and measure |
| Stable load capacitance | <22nF |
| Broadband noise(20MHz) | 3mV RMS(Typical value),<20mV Vp-p(Typical value) |
| Max voltage between FORCE HI and SENSE HI | 3V |
| Max voltage between FORCE LO and SENSE LO | 3V |
| Cable protection voltage | Output Impedance 30KΩ,Output voltage offset<80mV |
| Max sampling rate | 100000 S/s |
| Trigger | Supports IO triggering input and output, with configurable triggering polarity |
| Output interface | Rear panel interface |
| Communication port | RS-232, GPIB, LAN |
| Power | AC 100~240V 50/60Hz |
| Work environment | 25±10°C |
| Size | 425mm L × 255mm W × 106mm H |
| Warranty | 1Year |
cS series
Plug-in source Measure Unit
The high precision plug-in source measure unit has the characteristics of high channel density, strong synchronous triggering function, and high efficiency of multi-device combination. The host adopts a customized framework, with a backplane bus bandwidth of up to 3Gbps and supports 16 triggers, meeting the high-speed communication needs of multi-card devices.
To meet the different numbers of sub-cards, we launched two types of hosts 1003C and 1010C. The 1003C has a max capacity of 3 sub-cards, the 1010C, has a max capacity of 10 sub-cards. All sub-cards can be inserted into both types of hosts.
CS series source measure unit subcard is the high-precision, high-dynamic, plug-in source measure unit subcard with voltage, current input and output and measurement functions.
The max output voltage is up to 300V, the max output current is up to 1A and supports four-quadrant work, so it can be widely used in various electrical characteristics testing. The CS series source measure unit is suitable for all industry users, especially for modern semiconductors, nanometer devices and materials, organic semiconductors, printed electronics, and other small-size, low-power device characteristics analysis.
At present, CS100, CS200, CS300, CS400, CBI401 and CBI402 sub-cards have been developed, which CS100, CS200 and CS300 are single cards and single channels, CS400, CBI401 and CBI402 are single cards and four channels, and the four channels in the card share the same ground. When a 10-card host is used, we can get up to 40 channels. Users can select different sub-cards to achieve the optimal cost-effectiveness ratio.
SMU Features
- High-accuracy at 0.1%
- Four-quadrant operation(source and sink)
- Supports 10 subcards 40 channels
- Flexible channels Trigger Subcard Work efficiently
- Rich scanning modes
- Multiple interfaces RS-232/GPIB/LAN
SMU Applications
- Semiconductor device test: Resistance, Diode, Transistor, MOSFET, SiC, GaN, etc
- Energy and efficiency test: LED / AMOLED, Solar cells, DC-DC converters, etc
- Sensor characteristic test: Resistivity, Hall effect, etc
- Organic material test: Electronic ink, Printed electronic technology, etc
- Nanomaterial test: Graphene, Nanowires, etc
SMU Technical Parameters
Contact us to request the complete catalog and specification at info@chiplix.com.
1010c host
| Number of slots | 10 slots |
| Communication port | RS-232, GPIB, LAN |
| Power | AC 100~240V 50/60Hz，Max Power 500W |
| Work environment | 25±10°C |
| Size | 552mm L × 482mm W × 354mm H |
| Warranty | 1 Year |
1003c host
| Number of slots | 3 slots |
| Communication port | RS-232, GPIB, LAN |
| Power | AC 100~240V 50/60Hz，Max Power 500W |
| Work environment | 25±10°C |
| Size | 552mm L × 482mm W ×178mm H |
| Warranty | 1 Year |
