Recherche
Fermer cette boîte de recherche.

4-Channel I2C-Bus Switch With Interrupt Logic And Reset NCA9545

Numéro de pièce : NCA9545
Marque : Novosense
Substitute for: PCA9544A-PW, PCA9545A-PW, PCA9545B-PW, PCA9545C-PW, TCA9545A-PW

Description

The NCA9545 is a quad bidirectional translating switch controlled via the I2C bus. The SCL/SDA upstream pair fans out to four downstream pairs, or channels. Any individual SCn/SDn channel or combination of channels can be selected, determined by the contents of the programmable control register. Four interrupt inputs (INT3–INT0), one for each of the downstream pairs, are provided. One interrupt (INT) output acts as an AND of the four interrupt inputs.

An active-low reset (RESET) input allows the NCA9545 to recover from a situation in which one of the downstream I2C buses is stuck in a low state. Pulling RESET low resets the I2C state machine and causes all the channels to be deselected as does the internal power-on reset function.

The pass gates of the switches are constructed such that the VCC terminal can be used to limit the maximum high voltage, which will be passed by the NCA9545. This allows the use of different bus voltages on each pair, so that 1.8- V, 2.5-V, or 3.3-V parts can communicate with 5-V parts without any additional protection. External pull-up resistors pull the bus up to the desired voltage level for each channel. All I/O terminals are 5.5 V tolerant.

Avis

Il n’y a pas encore d’avis.

Soyez le premier à laisser votre avis sur “NCA9545”

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *

18 + 5 =

Pièces détachées

fr_FR
small_c_popup

Demande de devis pour des composants électroniques

Discutons-en